Unboxing video:
https://youtu.be/vWaRZKr6tRM?si=t-RhQoC4REKtGxxa
Things you'll need
To set up your Multiplier, you're going to need:
- A pair of scissors
- Help from one other person to lift the Multiplier
- Access to Wi-Fi and a smartphone for registration
Unboxing the First Make Kit
To start, unbox the First Make Kit. It comes with some items that you'll need in order to use the Multiplier.
You should find three bags inside the First Make Kit containing:
- Power cable
- Sample tool - we're going to use it to run our first tests
- Some sample sheet materials - EVA 1.5mm, PETG 1mm, and HIPS 1mm
Unboxing the Mayku Multiplier
Follow these step-by-step instructions:
- Place the Multiplier in a well-ventilated open area, on a surface that can take the weight of the machine (59kg unboxed). A minimum of 150mm is required behind the machine to allow for cables and other accessories. You will need a second person to help you during the Multiplier unboxing and lifting
- Use scissors or a knife to cut the straps and remove them, then take off the cardboard lid
- Pick up the activation leaflet and use your phone to scan the unique QR code to register your Multiplier. Alternatively, you can visit platform.mayku.me and enter the 20 digit serial number on the back of your machine
- Please read the complete instruction manual and keep it for future reference
- You'll also find a toolkit containing an allen key and a microfiber cloth. These are to help you maintain the machine over time. Learn more about the maintenance schedule here