Error code 41: Temperature rise error

A temperature rise error can occur when the temperature sensor is covered during the heating process.

If the temperature sensor is covered at the beginning of a heating cycle, a warning will now be displayed instead of a temperature rise error.

To prevent this happening, avoid covering the temperature sensor at any time (e.g. with your hands or a tool, as the sensor will not be able to measure the temperature accurately).

To solve the issue, try the following:

• Restart the forming process, ensuring that the sensor is not covered.If this doesn't solve the issue, run the self test program.

If the problem persists, please contact [email protected]

Error code 44: Heater error

Error 44 means that the heaters aren’t getting any power. This could be because:

• The machine has overheated, tripping the temperature failsafe system which cuts power to the heaters
• The switch controlling the heaters is broken (SSR fail)
• The heaters are damaged

If the Mayku Multiplier has performed many cycles and “Error 44” is displayed on the screen:

• Allow the machine to cool
• Restart the machine and check that the machine is running firmware 2.0 or later

Follow these steps to check your machine’s firmware:If the machine is cold when “Error 44” displays on the screen, it’s likely to be an SSR Fail. Check that the machine is on the latest firmware 2.0. If this does not solve the issue, please contact [email protected] who can help you process an RMA return.