Key Info

Size

• Ultimaker print space = 330 x 240 x 300 mm build volume (warp parameter; larger/ thicker / taller parts have a higher chance of heat distortion)

Recommended fillament

Use a high temp filament to avoid your template melting or defroming

• NYLON
• NYLON CF

Wall thickness

3mm minimum

If the wall thickness is too thin; the top thickness here was only 1mm and resulted in the top layer melting into the support structure with 3mm UHMW (2022). Here you can see there support structure showing through.

Infill density

Top thickness (must be equal to or larger than 3mm) / Bottom can be 0mm

Infill 50% (recommended types =Gyroid or Tri-Hexagon**)**